• Ideally suited for use with mineral oil and HFA-/HFC-liquids,skydrol, water etc.
• Integrated test points for acquiring pressure and temperature measurements
• Small physical dimensions, high pressure capability
• Installation in any position, reverse flow operation
• Low operational noise, high level of reproducibility
• Improved accuracy through linearization feature with the corresponding evaluative instrumentation from within our product range
• Measuring range expandable through linearization feature
Hydrotechnik flow sensor qualities
Measuring principle
volume fl ow
Viscosity range
1-270mm²/s (cSt)
Medium temperature
max. +120 °C
Environmental temperature
-20 ... +85 °C
Storage temperature
-20 ... +85 °C
Output signal
frequency (rectangle) / 4 ... 20 mA
Supply voltage Ub
12 ... 24 VDC
Electrical measuring connector
device connector 3 pole AMP, acc. to DIN 72585
Protection type (EN 60529 / IEC 529)
IP 69
Tightening torque
10 Nm (± 2 Nm)
Calibration viscosity
30 mm²/s (cSt)
Material turbine casing
Aluminium AlZnMgCu 1,5
Material turbine wheel
1.4122 (for measuring range 1.0 ... 10 l/min)
1.0718 (for all other measuring ranges)
