Hydrotechnik Multi-Handy2020

Hydrotechnik

	Multi-Handy2020
	Hydrotechnik
	Multi-Handy2020 data download

◆Hydrotechnik Multi-Handy 2020:
This integrated system of hydrotechnik measurement instrument, sensors and accessories allows plug-and-play without any problems: connect – switch on – measure. Stored measuring data can be transferred to a PC via USB, and the evaluation is done by an adapted version of the software HYDROcomsys.
◆Important Safety Information:
Please take note of the Safety Advice and Warning Hints contained on the information sheet (TKZ L8898-00-00.01) that is part of these instructions and delivered with the device.
◆Range of validity:
The manual on hand is valid for hydrotechnik measuring instruments named"MultiHandy 2020“. It adresses to the operator of this instrument, that means the person, who works with the instrument.
The manual is not a technical manual. For any queries beyond the scope of this manual please feel free to contact our service department.
◆Hydrotechnik Multi-System 5060 can display for pressure, flow, temperature, speed figures, time curve, XY curve and the curve of real-time or offline data .

Hydrotechnik's Multi-Handy2020 NO. Description 1 Keypad 2 LCD Display 3 Connectors 4 Channel 2 (analog) 5 Power supply – 6V power pack 6 USB – data transmission to/from PC 7 Channel 1 (analog) A 20 mA signal; Ri = 105 W; Ci = 10 nF; limitation: 5.6 VDC; protection type: VDR, transile diode B Ground C Sensor supply; limitation: 100 mA; protection type: current limitation PTC D not used E Shield F ISDS; limitation: 5.6 VDC; protection type: transile diode

Hydrotechnik's Multi-Handy2020 Technical data
Signal input	2 channels;0–20 mA switchable per ISDS to 4–20 mA;Ri = 105 W,Ci = 10 nF
A/D Resolution	12bit
Measuring accuracy	±0.2%FS
Measuring memory (1channel storage with ISDS only)	128 kB max. 60,000 measuring data; 1 channel: 60 sec. storage; 2 channels: 30 sec. storage
Hydrotechnik's Multi-Handy2020 display	30 x 58 mm LCD with backlight
Data transmission interface	USB(RS 232, 57,600 Baud)
Batteries	2x 1.2 V 2500 mAh NiMH cells
Ambient temperature and Storage temperature	0 ... 60 °C / -20 ... +70 °C
Relative humidity	0 to 80 %, not condensing
Dimensions (H x W x D)	185 x 90 x 46 mm
Weight (with batteries)	0.3 kg
Hydrotechnik's Multi-Handy2020 casing	ABS plastic
Noise emission	acc. to EN 61326
Noise immunity	acc. to EN 61326
Protective installation of sensor inputs	Reverse polarity protection, over voltage protection,self-resetting fuse protection
Hydrotechnik's Multi-Handy2020 scan rate	1mS
Series of measurement	1
Peak value measurement rate	1mS
Peak value update	100mS
ISDS sensors	any
Volume fl ow sensors	only via f/I-converter with inductive sensor (ISDS only)
Not-ISDS sensors (pressure only)	6 / 60 / 100 / 200 / 400 / 600 bar(0-20mA)

Hydrotechnik's Multi-Handy2020 Order number
	Hydrotechnik's Multi-Handy2020 Pressure ranges	Order number
	2x -1 to 6 bar (-0.1 o 0,6 MPa)	3160-32-32-69.00
	2x 0 to 60 bar (0 to 6 MPa)	3160-21-21-69.00
	2x 0 to 200 bar (0 to 20 MPa)	3160-10-10-69.00
	2x 0 to 400 bar (0 to 40 MPa)	3160-15-15-69.00
	2x 0 to 600 bar (0 to 60 MPa)	3160-18-18-69.00
	1x -1 to 6 bar (-0.1 to 0,6 MPa) 1x 0 to 60 bar (0 to 6 MPa)	3160-32-21-69.00
	1x 0 to 60 bar (0 to 6 MPa) 1x 0 to 200 bar (0 to 20 MPa)	3160-21-10-69.00
	1x 0 to 200 bar (0 to 20 MPa) 1x 0 to 400 bar (0 to 40 MPa)	3160-10-15-69.00
	1x 0 to 400 bar (0 to 40 MPa) 1x 0 to 600 bar (0 to 60 MPa)	3160-15-18-69.00
	Measuring set 2020 p/p:
	hydrotechnik Multi-Handy 2020 Power pack 6 VDC with country adaptor for EU, UK, US Plastic case in red color 2 pressure sensors with fixed cable length 2,5 m acc. to ordered pressure ranges, see table 2 MINIMESS® direct connection 1620 for pressure sensors	3160-XX-XX-69.00

Hydrotechnik Multi-Handy 3050

Hydrotechnik Multi-System 5060

Hydrotechnik Multi-System 8050